High Voltage DC Power Supply, 50,000 volts

Sold Out


50 KV High Voltage Power Supply

 
Portable, dual tap (50 KV & 25 KV) DC Power Supply

Our new 50 KV High Voltage DC Power Supply features a 50 KV and 25 KV output jacks on the front panel. Dual voltages makes the unit useful in a much wider variety of high voltage applications.
Although it looks similar to our 25KV Power Supply on the outside, internally it is quite different. All HV components are sealed in individual modules and are filled with high voltage insulating oil. This prevents internal arcing, flash-over, and also provides cooling to critical components. Very simple to operate & reliable. This is not an induction coil based power supply so there are no large coils to overheat and short out. This is an all electronic/solid-state power supply that outputs high voltage DC for powering our X-Ray tube, table-top particle accelerators, HV capacitor charging, animal/pest control, investigating electrical discharge phenomena such as Saint Elmo's fire & corona discharges, static generation, ion ray guns etc...
The HV Power Supply produces 50 kV (open circuit) with a short circuit current of <5 ma. It has built in short circuit protection.
The unit requires 12 volts DC at 1.5 amps. If you power it with a battery, it is very portable and easy to use as part of your project in science fairs & demos, automotive applications, and HV applications that need to be operational 'out in the field'. Just about any 12 volt battery works well, most customers choosing a lantern battery or a small, rechargeable motorcycle battery. You can also power it with a 12 volt AC power supply that will provide a minimum of 2 amps @ 12 volts DC. The HV Power Supply itself is quite robust. You can vary the input voltage to some degree and obtain an adjustable high voltage output. It will not however tolerate input voltages greater than about 15 volts.
High Voltage positive outputs are available on the front panel via standard banana jacks. A common negative HV jack and a power button are the only other items on the front panel. Use our optional High Voltage Cable Set for easy connection. Overall, the unit measures 7-7/8" (2002 mm) x 6-1/4" (157 mm) x 2-1/2" (62 mm).
Made in the USA.


50 KV High Voltage Power Supply: $269.00


Sold Out
  • Shipping Weight: 4.5lbs

Copyright © 2018 United Nuclear Scientific LLC.
SSL Certificate